255/35R19 vs 255/40R19: Tire Size Comparison
255/40R19 is 1.00 inches taller (3.9%) but 255/40R19 is 0.00 inches narrower than 255/35R19. Both mount on 19-inch wheels. Switching from 255/35R19 to 255/40R19 is a noticeable change; plan on checking clearance and possibly recalibrating the speedometer.
Side-by-side size chart
| Measurement | 255/35R19 | 255/40R19 | Difference |
|---|---|---|---|
| Overall diameter | 26.03 in | 27.03 in | +1.00 in (+3.9%) |
| Section width | 10.04 in | 10.04 in | +0.00 in |
| Sidewall height | 3.51 in | 4.02 in | +0.50 in |
| Wheel diameter | 19 in | 19 in | same |
| Circumference | 81.8 in | 84.9 in | +3.2 in |
| Revolutions per mile | 775 | 746 | -29 |
Calculated from the size codes. Real measurements vary slightly by brand, tread depth and rim width.
Speedometer difference
If your vehicle is calibrated for 255/35R19 and you fit 255/40R19, your real speed differs from what the speedometer shows:
| Speedometer reads | Actual speed |
|---|---|
| 30 mph | 31.2 mph |
| 45 mph | 46.7 mph |
| 60 mph | 62.3 mph |
| 70 mph | 72.7 mph |
| 80 mph | 83.1 mph |
Clearance and fitment
- Ride height changes by about 0.50 inches at the axle (higher with 255/40R19).
- The tire is 0.00 inches narrower, so check inner fender liners, upper control arms and sway bar links at full steering lock.
- Same wheel diameter, but confirm your rim width is inside the approved range for the new tire.
- Keep a load index at least equal to the factory tire, and use LT tires if your vehicle requires them.



