
Premium tires from 50+ brands — every size, every season
This category covers truck bed covers, bed liners and mats, running boards, nerf bars, bumpers and related accessories. The most important thing to know is that most truck parts fit by exact bed length and cab style, so confirm your year, make, model, cab and bed size before you buy.
Tonneau covers protect cargo from weather and theft. The main types differ in security, bed access and cost.
| Type | Material | Security | Bed access | Relative price | Notes |
|---|---|---|---|---|---|
| Soft roll-up | Vinyl over a frame | Low | Full; rolls up to the cab | Lowest | Lightweight and simple |
| Soft tri-fold | Vinyl over folding panels | Low | Most of the bed | Low to moderate | Quick to open; may block the rear window when folded upright |
| Hard folding | Aluminum or composite panels | Good; locks with the tailgate | Most of the bed | Moderate to high | Popular balance of security and access |
| Retractable | Aluminum or polycarbonate slats in a canister | Good; often lockable | Nearly full; the canister uses some space | High | Clean look, slides like a roll-top desk |
| One-piece hinged | Fiberglass or ABS | Good | Limited for tall loads | Moderate to high | Often painted to match |
Read tonneau covers for more on each type. Most covers clamp to the bed rails without drilling, though some use their own rail system. Check whether a cover works with bed rail caps, toolboxes, ladder racks or a bed-mounted tent before you order.
Bed protection keeps paint and metal safe from dents, scratches and rust.
Some tonneau covers and bed rail accessories work only with certain liner types, so check compatibility. See truck bed mats and liners.
Running boards are wide, flat steps that run along the cab. Nerf bars are tubular, usually round or oval, and give a sportier look. Power running boards deploy when a door opens and tuck away when it closes, which helps on lifted trucks. Rock sliders are a different product: they mount to the frame to protect rocker panels off-road and are typically stronger than step bars. Wheel-to-wheel steps extend past the cab to reach the bed. Aluminum boards resist rust and weigh less, while powder-coated steel tends to be stronger and less expensive. Check the weight rating and whether brackets bolt into existing holes in the cab.
Aftermarket bumpers range from stock-style replacements to steel off-road bumpers with winch mounts, shackle mounts and light mounts. Steel bumpers are strong but heavy, and a heavy front bumper with a winch can cause front sag; some owners add stiffer springs or adjust ride height, as covered in lift and leveling kits. Check compatibility with parking sensors, front cameras and adaptive cruise radar, since some bumpers do not support these systems. A winch should be rated for your vehicle's weight; a common guideline is a winch rated at about 1.5 times the gross vehicle weight. Lights for bumper mounts are covered in our LED light bar guide.
A hard folding tonneau cover is the most popular all-around choice because it offers good security and easy access to most of the bed at a moderate price. Soft roll-up covers are the budget pick, and retractable covers suit owners who want a clean look and quick full-bed access. Your security and access needs should decide.
A tonneau cover may slightly improve highway fuel economy on some trucks, but results vary and the difference is often small. Some tests have shown little change, while others report modest gains. Choose a cover for security, weather protection and convenience, and treat any mileage improvement as a possible bonus rather than the main reason.
A spray-in liner is generally better for long-term protection because it bonds to the bed and leaves no gap for water to collect. A drop-in liner costs less, installs in minutes and can be removed, but it can trap moisture and grit underneath. A rubber bed mat is a simple option if you mostly need floor protection.
Check your vehicle documentation, or measure inside the bed along the floor from the bulkhead at the cab to the inside of the closed tailgate. Common full-size sizes are roughly 5.5, 6.5 and 8 feet, but exact lengths vary by maker and model, and covers and liners are built to those exact sizes.
Choose running boards if you want a wide, flat step that is easy for passengers and kids. Choose nerf bars for a sportier, tubular look with a smaller step area. Power running boards suit lifted trucks where the step-in height is high. If you go off-road, rock sliders protect the body better than either.
It depends on the bumper. Many newer trucks have parking sensors, front cameras or radar for adaptive cruise and collision warning in or behind the bumper. Some aftermarket bumpers include provisions for these, while others do not, which can disable features. Check the product's listed compatibility with your truck's equipment before buying.