Trolling motor buying guide

Trolling Motor Accessories: What to Add and Why

Plugs, batteries, stabilizers and prop nuts are what keep a trolling motor reliable. Here is how to pick the right ones for your voltage and mount.

36 in-stock picks Updated November 18, 2026 30-day returns · Secure checkout
Shop the picks
Camco Trolling Motor Rigging KitConnect Ease 36 Volt Series Pro Trolling Motor Connection KitConnect Ease 36V Trolling Motor Separator Quick Connect KitConnect-Ease 36 Volt Trolling Motor Connection Kit With Onboard Charging
Wiring, plugs and connection kitsBatteries and voltage: 12, 24 or 36 voltMounts, stabilizers and handlesProps, prop nuts and transducer bracketsShop the picks ↓

A trolling motor is only as good as the system around it. Most of the problems anglers have on the water, such as a motor that cuts out, a battery that dies by noon, a bow mount that bounces loose on the trailer or a prop that walks off, come down to the accessories. This guide covers the four areas worth getting right: wiring and plugs, batteries and voltage, mounts and stabilizers, and props, prop nuts and transducer brackets. Start with one number: your motor's voltage (12, 24 or 36 volt). Almost every accessory decision follows from it.

Wiring, plugs and connection kits

A quick-disconnect plug lets you unplug the motor for storage, swap motors between boats and service the motor without cutting wires. The parts you will see:

  • Plug and receptacle sets: a boat-side receptacle mounted in the deck and a motor-side plug on the motor lead. Examples include the BEP ConnectPRO 70 amp receptacle, Rig Rite OEM retrofit plug and receptacle and Sierra Marine 12 volt sockets and plugs. Make sure the plug and receptacle are a matching style and rated for your motor's current draw.
  • Connection kits: Connect-Ease kits bundle the plug, wiring and battery connections for 12, 24 or 36 volt systems. Some versions also include onboard charger connections or a quick-connect separator.
  • Rigging kits: kits like the Camco trolling motor rigging kit cover the wire, terminals and plug for a fresh install.

Do it right: use the wire gauge the motor maker specifies for your cable run length, since undersized wire causes voltage drop and heat. Most motor makers also call for a circuit breaker in the positive lead sized to the motor, so check your motor's manual. Use marine-grade tinned wire and sealed, crimped terminals, and keep connections tight and clean. A loose or corroded terminal is the most common reason a motor cuts out under load. If you are moving a motor from one boat to another, buy a second receptacle for the new boat rather than splicing into old wiring of unknown gauge.

Batteries and voltage: 12, 24 or 36 volt

Motor voltageTypical setupGenerally suits
12 voltOne 12 volt deep-cycle batteryJon boats, small aluminum boats, kayaks and canoes
24 voltTwo 12 volt batteries wired in seriesMid-size fishing boats and bass boats
36 voltThree 12 volt batteries wired in seriesLarger and heavier boats, high-thrust bow mounts, long days in wind

Higher voltage generally means more thrust and longer run time at a given speed, but more battery weight. A common starting point for thrust is roughly 2 lb of thrust for every 100 lb of loaded boat weight, with more for wind and current. Your motor's spec sheet is the final word.

  • Lithium (LiFePO4): batteries like the Norsk 12.8V 105Ah weigh far less than lead-acid of similar capacity and let you use more of their rated capacity. They cost more up front and need a lithium-compatible charger. The Norsk 16V battery is a specialty voltage, so confirm your motor and charger accept it before buying. For battery chemistry trade-offs, see our AGM vs flooded vs lithium article.
  • Battery combiners: the Hypertech Trollbridge 24 and Trollbridge 36 are built for 12 volt to 24 or 36 volt trolling systems. Read the product details to see how they fit your battery bank and charging setup.
  • Charging: an onboard charger with one bank per battery keeps a series bank balanced. See our marine battery chargers guide.

Never mix old and new batteries, or different chemistries, in one series bank. The weakest battery drags the whole bank down. When you buy, match capacity across the bank too: same brand, same amp-hour rating and ideally the same age. Mount batteries in secured boxes or trays so they cannot shift, and keep the terminals covered so a dropped tool cannot short them.

Mounts, stabilizers and handles

Bow-mount motors take a beating on the trailer. Every bump flexes the shaft and mount, and that is how mounts crack and motors get damaged on the highway.

  • Stabilizers: a T-H Marine Troll-Tamer or similar stabilizer mount holds the stowed motor still, cutting the bounce that loosens hardware and wears the mount. It is one of the most worthwhile add-ons for any boat that travels by trailer.
  • Quick-release brackets: quick-release bow mount brackets, such as the Dock Edge 3 inch rise brackets, let you pull the motor off for storage, security or service, or share one motor between boats. A riser can also help clear a raised bow or rub rail.
  • Tension adjusters: the T-H Marine Troll Perfect adjusters are made for specific motor families (Minn Kota and MotorGuide X3/X5 versions), so order the one that matches your motor.
  • Handles: the T-H Marine G-Force handles give you a better grip and lift assist for stowing and deploying, and the clamp version fits tiller-style motors.

Check that all mount bolts are tight at the start of each season, and use stainless or marine-rated hardware if you replace any. If you are adding rod holders or electronics nearby, our fishing rod holders and mounts guide covers bow layout.

Props, prop nuts and transducer brackets

Trolling motor props are held on by a nut and a drive pin. Weeds, stumps and rocks can shear the pin or back the nut off, and a lost nut usually means a lost prop. Carry a spare prop nut, washer and drive pin in the boat.

  • Prop nuts: upgrades like the T-H Marine G-Force Grass Goat and Bob's Machine prop nut are sold as upgrades over the stock nut (the Grass Goat is built to cut through weeds) and are listed for specific Minn Kota sizes. Replacement prop nut kits from GLM and Engineered Marine Products are an inexpensive spare. Always match the nut to your motor brand, shaft and thrust class.
  • Transducer mounting: mounting your sonar transducer on the trolling motor points it wherever the motor points. The Humminbird XTM 9 SI 180 is a trolling motor mount transducer, and brackets like the Rig Rite transducer bracket help hold a transducer on the motor. Run the cable along the shaft with ties that allow the motor to turn freely.

After every trip in heavy weeds, pull the prop and clear fishing line wrapped around the shaft. Line can work its way behind the prop and damage the motor's seals over time.

In-stock trolling motor accessories

Every product below is in stock now. Prices update daily.

Frequently asked questions

How many batteries does a 24 volt trolling motor need?+
Typically two 12 volt deep-cycle batteries wired in series. A 36 volt motor uses three. Some lithium batteries are sold as a single 24 or 36 volt unit, so check the battery's rated voltage.
Do I need a circuit breaker for my trolling motor?+
Most trolling motor makers recommend one in the positive lead, sized for the motor, to protect the wiring. Check your motor's manual for the correct rating and wire gauge.
Can I use a lithium battery with my trolling motor?+
In most cases yes, as long as the battery's voltage matches the motor and you use a charger with a lithium setting. Lithium batteries are much lighter than lead-acid but cost more. Check the motor maker's guidance before using a non-standard voltage.
What does a trolling motor stabilizer do?+
It holds a stowed bow-mount motor steady while trailering, reducing the bouncing that loosens bolts, wears the mount and can damage the motor over time.
Why does my trolling motor keep losing its prop?+
Usually the prop nut backed off or the drive pin sheared after hitting weeds or debris. Replace the nut and pin with parts matched to your motor, tighten to the maker's spec and carry spares.

Further reading

More buying guides

Find the perfect parts for your ride
Shop top brands at unbeatable prices.