Most ATV and UTV owners upgrade in the same order: tires and wheels first, then the drivetrain and suspension parts that bigger tires stress, then work and utility gear like winches, carts and implements, and finally comfort and protection such as bumpers, tops and audio. This guide walks through each step using the brands we carry, including Polaris and Can-Am fitment parts from Dynojet, Demon Powersports, Method Race Wheels, ITP, Maxxis and Superwinch. One rule applies to every part: match it to your exact make, model and year, because even models with the same name can differ.
ATV and UTV tires and wheels
Powersports tire sizes read differently from car tires. A size like 30x10R14 means about 30 inches tall, 10 inches wide, radial construction, for a 14 inch wheel. A dash instead of the R, as in 24x10.00-11, means bias-ply.
| Bias-ply | Radial | |
|---|---|---|
| Ride | Stiffer sidewall, firmer ride | Smoother ride, especially at speed |
| Strengths | Puncture-resistant sidewalls, lower cost, good for mud and rocks at low speed | Longer tread life, better handling on hardpack and trails |
| Examples we carry | ITP Mud Lite, GBC Dirt Devil, ITP Cryptid | Maxxis Bighorn Radial, ITP Coyote, Toyo Open Country SXS, Tensor Desert Series |
- Ply rating: higher ply ratings (6 or 8 ply) resist punctures better on rocky ground but weigh more.
- Air pressure: ATV and UTV tires run at far lower pressures than car tires, often in the single digits to low teens psi. Use a low-pressure gauge and follow the pressures on your machine's tire placard or in the owner's manual, since a few psi changes how the machine rides and steers.
- Going taller: bigger tires add ground clearance but load the belt, clutch and axles harder and can rub without a lift. Many riders recalibrate the clutch when going up a size or two.
- Wheels: powersports bolt patterns vary by maker. As examples, many Polaris models use 4x156 and many Can-Am models use 4x137, but always confirm your machine's pattern, offset and center bore. Method Race Wheels' MR401 comes in standard and beadlock versions. Learn when a beadlock is worth it in our beadlock wheels article.
Belts, clutches, tuners, axles and suspension
- Drive belts: CVT belts wear with heat and load. Replacement belts from Gates (G-Force RedLine) and Ultimax are listed by machine. Use low range for slow, heavy work, follow the belt's break-in procedure and carry a spare on long rides. Slipping under load or a burning smell from the clutch cover are common signs a belt is worn or glazed and should be checked.
- Clutch kits: kits like the Dynojet clutch kit for the Polaris RZR XP Turbo re-tune shift points, which helps when you add bigger tires or ride at altitude.
- Tuners: the Dynojet Power Vision 3 is sold for specific Polaris RZR and Ranger models. Engine tuning can affect your warranty and may not be legal for road or public-land use where emissions rules apply, so check your warranty terms and local and state rules before you tune.
- Axles: bigger tires, lift kits and aggressive riding break axles. Demon Powersports offers OEM-style replacement and heavy-duty axles for many RZR, Sportsman, Defender and Outlander models.
- Lift kits and suspension: lifts from High Lifter and Thumper Fabrication add clearance for bigger tires. Lifts change axle angles, so pair them with axles rated for the extra angle. Spring kits from Eibach, anti-roll bars and Fox coilovers improve ride and handling under load.
Upgrading suspension on a truck instead? See our shocks and struts guide.
Winches, carts, implements and storage
A quad or side-by-side is one of the most useful work tools on a farm, hunting property or large lot.
- Winches: ATV winches like the Superwinch LT3000 (3,000 lb) are compact 12 volt units. A common rule of thumb is a winch rating of at least 1.5 times the machine's loaded weight. Use a winch mount made for your model and synthetic rope if you want lighter weight. Our off-road recovery gear guide covers straps, shackles and safe winching.
- Carts and trailers: poly dump carts from Agri-Fab and Ohio Steel and ATV trailers like the DK2 ATV700 haul feed, firewood and tools. Check your machine's towing and tongue-weight ratings in the owner's manual and stay within the lower of those and the cart's rating. Hitch setups vary: many UTVs have a 2 inch receiver, while many ATVs use a smaller receiver or a ball-mount plate, so confirm what your machine has before you buy a cart or trailer.
- Implements: Camco Black Boar cultipackers and landscape rakes help prepare food plots and level gravel. Rules for planting and hunting food plots vary by state, so check local regulations.
- Storage: rear boxes like the Otter Ice ATV Monster Box, gun cases like the Du-Ha ATV UTV storage case and bed covers like the Du-Ha Rotokap for the RZR Pro XP keep gear dry and secure. Check local laws on transporting firearms.
Protection, comfort and fitment traps
Bumpers and bull bars (AFN 4x4 RZR bull bar, Thumper Fabrication Can-Am Defender winch bumper), running boards (Romik), sun tops (Vertically Driven Products), and audio like the Boss Audio ATV/UTV sound bar and MB Quart Defender package round out a build. Weatherproof ratings (such as IPX5 on the Boss sound bar) matter on an open machine.
Watch the model names. Several powersports names are shared with trucks and other vehicles, and listings can be confusing:
- Ranger: the Polaris Ranger is a UTV; the Ford Ranger is a pickup. Make sure a Ranger part says Polaris.
- Defender: the Can-Am Defender is a UTV; the Land Rover Defender is an SUV. Look for Can-Am in the name.
- Maverick and Outlander: Can-Am Maverick and Outlander are powersports models; Ford Maverick and Mitsubishi Outlander are not.
- Trim and year: parts for a RZR XP, RZR Pro XP, RZR Turbo and RZR 900 are not interchangeable, and 2-seat and 4-seat versions often differ. Match the exact model and year in the listing.
Hauling the machine to the trail? Our trailer tires and wheels guide covers the trailer side.



















































