Banks cold air intakes, sold as Banks Ram-Air intake systems, replace a truck's factory airbox and intake tube with a larger filter and housing designed to pull in cooler, denser air with less restriction. They are most popular on diesel pickups, where airflow matters for towing, and Banks also makes intakes for a number of gas trucks.
This page lists the Banks Ram-Air intakes, replacement filter elements and related intake parts we carry, followed by other Banks power products such as tuners, exhaust systems, differential covers, boost tubes and gauge pods. Read the notes below on filters, fitment and California rules before you order.
Dry vs oiled Ram-Air filters
Banks Ram-Air systems are typically offered with either a dry or an oiled filter element, and replacement elements are sold separately. Banks dry filter part numbers often end in -D, but confirm on the listing.
| Filter | Maintenance | Things to know |
|---|---|---|
| Dry | Clean or replace per the manufacturer's instructions; no oil to apply | No risk of over-oiling a mass airflow sensor; many diesel owners prefer dry for this reason |
| Oiled | Wash, dry and re-oil with the correct filter oil | Reusable for a long time; apply oil sparingly and follow the service kit instructions |
Either way, check the filter on a regular schedule, and more often in dusty conditions, on gravel roads or on job sites. A restriction gauge or filter minder, where fitted, is the best guide to when service is due.
Fitment: Duramax, Cummins, Power Stroke, EcoDiesel and gas trucks
Banks intakes are vehicle-specific. Each kit is built for a particular make, model, engine and year range, such as GM Duramax 6.6L (for example the LML or L5P), Ram Cummins 6.7L, Ford Power Stroke 6.7L, the Ram and Jeep 3.0L EcoDiesel, and certain gas V8 trucks. A kit for one engine generation usually will not fit the next, even on the same truck model.
To confirm fit, use the Banks part number. Match it against your year, make, model, engine and, where it matters, cab and bed or emissions package, then cross-check it with the Banks fitment information or your vehicle's details before ordering. If a listing title mentions years or engines, treat that as a starting point and verify by part number. Not every Banks product with "Ram" or "intake" in the name is a cold air intake: the Monster-Ram and High-Ram parts, for example, are intake elbow or manifold parts that sit after the intercooler, and some Banks transmission pans also carry the Ram-Air name.
Installation is typically a bolt-on job with hand tools: remove the factory airbox and tube, transfer sensors to the new housing, and fit the Banks tube and filter. Follow the kit instructions closely, make sure every clamp is tight and every sensor is reconnected, and check for any check engine light after the first drive.
California and CARB EO numbers
In California and states that follow California rules, aftermarket parts that change the air intake on an emissions-controlled vehicle generally need a CARB Executive Order (EO) number to be street legal. Many Banks intakes have an EO for specific vehicles, but not every part or year range does. Check the specific part's EO status with Banks or the CARB database before you buy, and keep the EO label or paperwork with the truck for inspections. Rules vary by state and can change.
Intakes pair naturally with other Banks parts in the second group below. For towing setups, see our exhaust systems guide, or browse more engine parts.



















